Kits for DIY
LaneRow will help you design your garden room or office kit, then we will fabricate it and deliver to your door. With our comprehensive instructions you will be able to build your own garden room (ideally with the assistance of a helper or two).
Then add a standard installation kit or go fully bespoke, the kit can be as comprehensive as you need. Just the structure? That's easily done. The complete decorated package with all the fittings and fixtures? Yes, we can do that too.
SIPs Structure Kit
Comprises:Roof, wall & floor panels
All screws & glues
All structural timbers
Building wrap
Installation instructions
Roof option 1 - EPDM Rubber Sheet
For flat or pent roofs, not for pitched roofs. Comprises: EPDM rubber sheet Adhesive Edge strips Half-round guttering with all brackets & single downpipe Installation instructionsRoof option 2 - GRP Glass Reinforced Plastic
For flat or pent roofs, not for pitched roofs. Comprises: Epoxy Glass fibre mat Edge strips Half-round guttering with all brackets & single downpipe Installation instructionsStandard Exterior Finishing Kit
Under construction, please bear with us and check back very soon.Here we'll describe a basic kit for the exterior facade
Standard Interior Finishing Kit
Under construction, please bear with us and check back very soon.
Here we'll describe a basic kit for interior finishing
Sedum Roof
Under construction, please bear with us and check back very soon.
Here we'll describe an option for a sedum roof
Foundations option 1 - Ground Screws
Ground-screws are effectively screw-in piles. They install quickly and are appropriate where there is no risk of subsidence or heave. Typically a grid of screws at 600mm spacings are required.
Foundations option 2 - Reinforced Concrete Slab
Typically 200mm to 300mm thick reinforced with a steel mesh. Poured directly on top of firm ground, the slab "floats" so is tolerant of some ground instability.